The first thing we are going to do is press ‘Routing’ then tab over to ‘P16 Out’. These are a lot of options, but the ‘P-16 Out 1-16’ and the ‘XLR Out 1-16’ are going to be the most fundamental routing locations for our purpose. The X-UF and X-USB expansion card can be fed signal from a bunch of different taps. When we want to do something like this, the X32 does not natively allow this, however, we can do some creative routing to make it work! Behringer X32 Recording with Effects What about Effects or a Post Fader Recording?!įor those using the Behringer X32 as a recording studio interface, some may want to have a post fader recording tap so that they can closely control the recording level to the DAW or even record a ‘processed’ signal with the EQ, Gate, and Dynamics of the X32. The signal from the X-UF and X-USB will play right back after the preamp, but before any of the Low Cut, Polarity Reverse, EQ, Gate, Dynamics, etc. This is perfect when using the recordings as a ‘virtual sound check’ where we can play the recorded tracks out of the DAW and inject the signal back into the X32 so that one can mix without any live band on stage. The X32 taps the signal for the X-UF and X-USB right after the preamp, so any of the Low Cut, Polarity Reverse, EQ, Gate, Dynamics, etc. Make sure to check out my YouTube video “Behringer X32 Recording with Effects!” These cards allow the X32 to record up to 32 channels at the same time into a computer! The X-UF card has both Firewire and USB 2.0, where the X-USB has only USB 2.0 but both cards are able to pass 32 channels In and 32 channels Out of a digital audio workstation (DAW) on a computer. With all of the things that the Behringer X32 does, one of my favorite features is the X-UF and X-USB expansion cards.

Behringer x32 usb output routing